The Cisco TelePresence® SX10 Quick Set is an all-in-one unit designed to video-enable your small collaboration spaces, offering great affordability for small-to-medium businesses just starting out with telepresence. With the SX10 you can extend telepresence pervasively throughout your enterprise.
This low-cost, high-quality unit combines camera and codec into a single, compact device that is mounted over your standard flat-panel display and connects through a discreet single-cable system for Power over Ethernet (PoE). High-definition video is enabled with 1080p30 resolution, while a leadership wide-angle field of view provides the best overview even in small spaces.
High quality, simplicity, and affordability come together in the SX10 Quick Set to create a logical solution for video ubiquity
Cisco TelePresence SX10 in a Project Room Environment
Features
The primary features of the Cisco TelePresence SX10 follow:
● Optimal definition up to 1080p30 with content sharing at WXGAp5
● Wide-angle 83° horizontal FOV with 5x zoom*
● Ready-to-use unit with Power over Ethernet (PoE)
● Integrated microphone
● Energy efficient with low consumption (EU Class B)
● Registers with Cisco® Unified Communications Manager (UCM) and Cisco TelePresence Video Communication Server (VCS)
|
Cisco TelePresence SX10 Wall-Mount Solution
Product Capabilities
Specification
|
Description
|
Bandwidth
|
● Up to 3 Mbps
|
Minimum bandwidth for resolution/frame rate
|
● 720p30 from 768 kbps
● 1080p30 from 1472 kbps
|
Firewall traversal
|
● Cisco TelePresence Expressway Technology
|
Video standards
|
● H.263, H.263+, and H.264
|
Video inputs
|
Two video inputs (HDMI or VGA selectable through user interface)
Supported Formats:
● 640x480 (VGA)
● 720x480
● 704x576 (4CIF)
● 800x600 (SVGA)
● 848x480
● 1024x768 (XGA)
● 1152x864 (XGA+)
● 1280x720 (720p)
● 1280x768 (WXGA)
Extended Display Identification Data (EDID)
|
Video output
|
HDMI Output Supported Formats:
● 1920 x 1080@60 fps (1080p60)
● 1920 x 1080@50 fps (1080p50)
VESA Monitor Power Management
Extended Display Identification Data (EDID)
|
Live video resolutions
|
Live Video Resolutions (Encode and Decode):
● 176 x 144@30 (QCIF) (Decode only)
● 352 x 288@30 (CIF)
● 512 x 288@30 (w288p)
● 576 x 448@30 (448p)
● 768 x 448@30 (w448p)
● 704 x 576@30 (4CIF)
● 1024 x 576@30 (w576p)
● 640 x 480@30 (VGA)
● 800 x 600@30 (SVGA)
● 1024 x 768@30 (XGA)
● 1280 x 768@30 (WXGA)
● 1280 x 720@30 (HD720p)
● 1920 x 1080@30 (HD1080p)
|
Audio standards
|
● 64 kbps MPEG4 AAC-LD, OPUS, G.722, G.722.1, G.711mu, G.711a, G.729ab, and G.729
|
Audio features
|
● High-quality 20-kHz mono
● Two acoustic echo cancellers
● Automatic Gain Control (AGC)
● Automatic noise reduction
● Active lip synchronization
|
Audio inputs
|
● One internal microphone
● One external microphone, 4-pin mini-jack (Cisco TelePresence Table Microphone 20)
● One HDMI audio-in
|
Audio outputs
|
● One line out, mini-jack
● One HDMI, (digital main audio)
|
Dual stream
|
● BFCP (SIP) dual stream
● Resolution up to WXGAp5
|
MultiPoint support
|
● Cisco Ad-Hoc Conferencing (requires Cisco UCM, Cisco TelePresence Server, and Cisco TelePresence Conductor)
|
Protocols
|
● SIP
|
Embedded encryption
|
● SIP point-to-point
● Standards-based: Advanced Encryption Standard (AES)
● Automatic key generation and exchange
● Supported in dual stream
|
IP network features
|
● DNS lookup for service configuration
● Differentiated Services (QoS)
● IP adaptive bandwidth management (including flow control)
● Dynamic playout and lip-sync buffering
● Date and Time support via NTP
● Packet Loss based downspeeding
● URI Dialing
● TCP/IP
● DHCP
● 802.1x Network authentication
● 802.1Q Virtual LAN
● 802.1p (QoS and class of service [CoS])
● ClearPath
● Medianet: Mediatrace and metadata
|
Cisco Unified Communications Manager (Requires Cisco UCM Version 8.6 or later
|
● Native registration with Cisco Unified Communications Manager
● Basic Cisco Unified Communications Manager provisioning
● Firmware upgrade from Cisco Unified Communications Manager
● Cisco Discovery Protocol and DHCP option 150 support
● Basic telephony features such as hold, resume, transfer, and corporate directory lookup
|
IPv6 network support
|
● Dual-stack IPv4 and IPv6 for DHCP, Secure Shell (SSH), HTTP, Secure HTTP (HTTPS), DNS, and Differentiated Services (DiffServ)
● Support for both static and autoconfiguration (stateless address autoconfiguration)
|
Security features
|
● Management through HTTPS and SSH
● IP administration password
● Menu administration password
● Disable IP services
● Network settings protection
|
Network interfaces
|
● One PoE-enabled LAN connector (RJ-45) 100-Mbit
|
Other interfaces
|
● One USB port for future usage
● One Micro USB port for debugging
|
Comments
Post a Comment